1205 · 25 × 52 × 15

Self-aligning ball · 1205

radial — mediumaxial — low, on both sides

    Drawing of 1205: ⌀25 × ⌀52 × 15 mm⌀52⌀25151205
    Fig. 1: 1205, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
    Bearing Z&S 1205 — photo 1
    Bearing Z&S 1205 — photo 2
    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing Z&S 1205

    Price on request
    Available to order

    Specifications

    Manufacturer number
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    15 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.14 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 52 × 15 from other brands

    17 products
    Photo: 1205
    You are viewingZ&S 1205

    Everything the number specifies matches: series 12, 25 × 52 × 15 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.

    • Photo: 12051205This bearingZ&S25 × 52 × 15out of stockon requestyou are here
    • Series illustration (not a photo of this item): 12051205CT25 × 52 × 151,449 pcs€1.27
    • Series illustration (not a photo of this item): 12051205NTE25 × 52 × 1588 pcs€2.27
    • Series illustration (not a photo of this item): 12051205Koyo25 × 52 × 1536 pcs€12
    • Series illustration (not a photo of this item): 12051205no brand25 × 52 × 15available to orderon request
    • Series illustration (not a photo of this item): 12051205KG25 × 52 × 15available to orderon request
    • Series illustration (not a photo of this item): 12051205NSK25 × 52 × 15available to orderon request
    02

    Often bought with this

    seal 25×52, shaft snap ring Ø25, bore snap ring Ø52

    6 products
    • Seal 25×52JULU 025-52-10 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing
      €0.392,950 pcs
    • Seal 25×52JULU 025-52-7 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing
      €0.397,720 pcs
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 25 × 52 × 15mm
    mweight 0.14kg

    Self-aligning ball bearing 1205. Under GOST the same bearing is designated 1205.

    M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1205?

    It is the same bearing under GOST 3189-89: 1205 corresponds to the ISO base 1205. Size 25 × 52 × 15 mm, a full equivalent of 1205.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet