+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €3.08 per piece.
6305 2RS K · 25 × 62 × 17

Deep groove ball · 6305 2RS K

radial — mediumaxial — low, on both sides
    Drawing of 6305 2RS K: ⌀25 × ⌀62 × 17 mm6305 2RS K2RS
    Fig. 1: 6305 2RS K, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
    Bearing WBW 6305 2RS K — photo 1
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing WBW 6305 2RS K

    €3.73per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 72 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    17 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    m
    0.23 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 62 × 17 from other brands

    74 products
    Photo: 6305 2RS K
    You are viewingWBW 6305 2RS K
    €3.73baseline for the price comparison

    Everything the number specifies matches: series 63, 25 × 62 × 17 mm, contact seals on both sides, K, normal clearance, special design. The codes in the number are read against the WBW catalogue.

    • Photo: 6305 2RS K6305 2RS KThis bearingWBW25 × 62 × 17available to order€3.73you are here
    • Photo: 6305 2RS K6305 2RS KZ&S25 × 62 × 17out of stockon request

    Under the price: the difference from the price of this bearing (€3.73).
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    15 machines2 makesby parts catalogues

    1. KhTZ-16131, KhTZ-16331 KhTZ same geometry 3 assemblies · 4 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    2. KhTZ-17021, KhTZ-17221 KhTZ same geometry 3 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    3. KhTZ-242K.20 KhTZ same geometry 3 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    4. KhTZ-243K.20 KhTZ same geometry 3 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    5. T-150K (KhTZ-150K-09-25) KhTZ same geometry 3 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: Tractor KhTZ-150K-09-25. Operator’s manual 151.00.000-09-25 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 62d 25B 17
    d×D×Bsize 25 × 62 × 17mm
    mweight 0.23kg

    Deep groove ball bearing 6305 K-2RS, design 2RS: contact seals on both sides.

    M: WBW data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet