+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
WBF
2204 · 20 × 47 × 18

Self-aligning ball · 2204

radial — mediumaxial — low, on both sides
    Drawing of 2204: ⌀20 × ⌀47 × 18 mm⌀47⌀20182204
    Fig. 1: 2204, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2204

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing WBF 2204

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    2 exact, 12 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    18 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.134 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 20 × 47 × 18 from other brands

    15 products
    Series illustration (not a photo of this item): 2204
    You are viewingWBF 2204

    Everything the number specifies matches: series 22, 20 × 47 × 18 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the WBF catalogue.

    • Series illustration (not a photo of this item): 22042204This bearingWBF20 × 47 × 18out of stockon requestyou are here
    • Series illustration (not a photo of this item): 22042204M.G.M.20 × 47 × 18out of stockon request
    02

    Often bought with this

    seal 20×47, shaft snap ring Ø20, bore snap ring Ø47

    5 products
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing
      €0.293,920 pcs
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 20 × 47 × 18mm
    mweight 0.134kg

    Self-aligning ball bearing 2204. Under GOST the same bearing is designated 1504.

    M: WBF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1504?

    It is the same bearing under GOST 3189-89: 1504 corresponds to the ISO base 2204. Size 20 × 47 × 18 mm, a full equivalent of 2204.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet