WBF
1309 · 45 × 100 × 25

Self-aligning ball · 1309

radial — mediumaxial — low, on both sides

    Drawing of 1309: ⌀45 × ⌀100 × 25 mm⌀100⌀45251309
    Fig. 1: 1309, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1309

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing WBF 1309

    Price on request
    Available to order

    Specifications

    Manufacturer number
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    25 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.96 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 100 × 25 from other brands

    21 products
    Series illustration (not a photo of this item): 1309
    You are viewingWBF 1309

    Everything the number specifies matches: series 13, 45 × 100 × 25 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the WBF catalogue.

    • Series illustration (not a photo of this item): 13091309This bearingWBF45 × 100 × 25out of stockon requestyou are here
    • Series illustration (not a photo of this item): 13091309CT45 × 100 × 25286 pcs€5.77
    • Photo: 13091309NEU45 × 100 × 25available to order€8.28
    • Photo: 13091309URB45 × 100 × 25available to order€10.04
    • Photo: 13091309Z&S45 × 100 × 25available to order€12.92
    • Photo: 13091309M.G.M.45 × 100 × 25available to order€14.04
    • Photo: 13091309GPZ45 × 100 × 25available to order€14.94
    • Series illustration (not a photo of this item): 13091309no brand45 × 100 × 25available to orderon request
    • Series illustration (not a photo of this item): 13091309KG45 × 100 × 25available to orderon request
    02

    Often bought with this

    seal 45×100, shaft snap ring Ø45, bore snap ring Ø100

    3 products
    • Seal 45×100JULU 045-100-10 TCWhy it fits: Oil seal 45×100: shaft 45 and housing bore 100, the same as the bearing
      €0.93available to order
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 45 × 100 × 25mm
    mweight 0.96kg

    Self-aligning ball bearing 1309. Under GOST the same bearing is designated 1309.

    M: WBF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1309?

    It is the same bearing under GOST 3189-89: 1309 corresponds to the ISO base 1309. Size 45 × 100 × 25 mm, a full equivalent of 1309.

    Will 1309 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet