+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 210 · 50 × 90 × 20

Cylindrical roller · NU 210

radial — high
    Drawing of NU 210: ⌀50 × ⌀90 × 20 mm⌀90⌀5020NU 210
    Fig. 1: NU 210, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 210

    Load: radial high; no axial loadCylindrical roller NU

    Bearing URB NU 210

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    10 exact, 29 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    20 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.49 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 90 × 20 from other brands

    42 products
    Series illustration (not a photo of this item): NU 210
    You are viewingURB NU 210

    Size and design match across the brand catalogues. The codes in the number are read against the URB catalogue.

    • Series illustration (not a photo of this item): NU 210NU 210This bearingURB50 × 90 × 20out of stockon requestyou are here
    • Series illustration (not a photo of this item): NU 210NU 210CT50 × 90 × 206 pcs€4.50
    • Photo: NU 210 ETVP2NU 210 ETVP2FAG50 × 90 × 20available to order€41.48
    • Series illustration (not a photo of this item): NU 210NU 210FAG50 × 90 × 20out of stockon request
    • Series illustration (not a photo of this item): NU 210NU 210FKL50 × 90 × 20out of stockon request
    • Series illustration (not a photo of this item): NU 210 MNU 210 MGPZ50 × 90 × 20out of stockon request
    • Series illustration (not a photo of this item): NU 210 MNU 210 MNEU50 × 90 × 20out of stockon request
    • Series illustration (not a photo of this item): NU210ET *5NU210ET *5NSK50 × 90 × 20available to orderon request
    • Series illustration (not a photo of this item): NU 210 ECPNU 210 ECPSKF50 × 90 × 20available to orderon request
    • Series illustration (not a photo of this item): NU 210 ENU 210 EZVL50 × 90 × 20available to orderon request
    02

    Often bought with this

    seal 50×90, shaft snap ring Ø50, bore snap ring Ø90

    5 products
    • Seal 50×90JULU 050-90-10 TCWhy it fits: Oil seal 50×90: shaft 50 and housing bore 90, the same as the bearing
      €0.73280 pcs
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 90 × 20mm
    mweight 0.49kg

    Cylindrical roller NU bearing NU 210.

    M: URB data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 210 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet