+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22336 MBW33 · 180 × 380 × 126

Spherical roller · 22336 MBW33

radial — highaxial — medium, on both sides
    Drawing of 22336 MBW33: ⌀180 × ⌀380 × 126 mm⌀380⌀18012622336 MBW33
    Fig. 1: 22336 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22336 MBW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing URB 22336 MBW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 6 approximate
    d
    180 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    380 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    126 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 180 × 380 × 126 from other brands

    10 products
    Series illustration (not a photo of this item): 22336 MBW33
    You are viewingURB 22336 MBW33

    Everything the number specifies matches: series 223, 180 × 380 × 126 mm, open, no protection, normal clearance, special design. The codes in the number are read against the URB catalogue.

    • Series illustration (not a photo of this item): 22336 MBW3322336 MBW33This bearingURB180 × 380 × 126available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22336 MB22336 MBFAG180 × 380 × 126available to orderon request
    • Series illustration (not a photo of this item): 22336 MBW3322336 MBW33KG180 × 380 × 126available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 180 × 380 × 126mm

    Spherical roller bearing 22336. Under GOST the same bearing is designated 3636.

    Frequently asked questions

    What is 3636?

    It is the same bearing under GOST 3189-89: 3636 corresponds to the ISO base 22336. Size 180 × 380 × 126 mm, a full equivalent of 22336.

    Will 22336 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet