+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22308 CW33 · 40 × 90 × 33

Spherical roller · 22308 CW33

radial — highaxial — medium, on both sides
    Drawing of 22308 CW33: ⌀40 × ⌀90 × 33 mm⌀90⌀403322308 CW33
    Fig. 1: 22308 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22308 CW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing URB 22308 CW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 17 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    33 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 40 × 90 × 33 from other brands

    25 products
    Series illustration (not a photo of this item): 22308 CW33
    You are viewingURB 22308 CW33

    Everything the number specifies matches: series 223, 40 × 90 × 33 mm, open, no protection, normal clearance, special design. The codes in the number are read against the URB catalogue.

    • Series illustration (not a photo of this item): 22308 CW3322308 CW33This bearingURB40 × 90 × 33available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22308 CW3322308 CW33CT40 × 90 × 331,687 pcs€7.22
    • Series illustration (not a photo of this item): 22308 CW3322308 CW33NTE40 × 90 × 3348 pcs€13.90
    • Series illustration (not a photo of this item): 22308 CW3322308 CW33no brand40 × 90 × 33available to orderon request
    • Series illustration (not a photo of this item): 22308 CW3322308 CW33KG40 × 90 × 33available to orderon request
    02

    Often bought with this

    seal 40×90, shaft snap ring Ø40, bore snap ring Ø90

    6 products
    • Seal 40×90JULU 040-90-10 TCWhy it fits: Oil seal 40×90: shaft 40 and housing bore 90, the same as the bearing
      €0.73400 pcs
    • Seal 40×90JULU 040-90-12 TCWhy it fits: Oil seal 40×90: shaft 40 and housing bore 90, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 40 × 90 × 33mm

    Spherical roller bearing 22308. Under GOST the same bearing is designated 53608.

    Frequently asked questions

    What is 53608?

    It is the same bearing under GOST 3189-89: 53608 corresponds to the ISO base 22308. Size 40 × 90 × 33 mm, a full equivalent of 22308.

    Will 22308 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet