+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6314 ZZ · 70 × 150 × 35

Deep groove ball · 6314 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6314 ZZ: ⌀70 × ⌀150 × 35 mm6314 ZZZZ
    Fig. 1: 6314 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6314 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing TIMKEN 6314 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    7 exact, 38 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    35 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    104.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    68 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    m
    2.5 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 70 × 150 × 35 from other brands

    48 products
    Photo: 6314 ZZ
    You are viewingTIMKEN 6314 ZZ

    Everything the number specifies matches: series 63, 70 × 150 × 35 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

    • Photo: 6314 ZZ6314 ZZThis bearingTIMKEN70 × 150 × 35out of stockon requestyou are here
    • Series illustration (not a photo of this item): 6314 ZZ6314 ZZCT70 × 150 × 3544 pcs€9.03
    • Photo: 6314-2Z6314-2ZSKF70 × 150 × 355 pcs€68.14
    • Photo: 6314 ZZ6314 ZZZ&S70 × 150 × 35available to order€24.58
    • Series illustration (not a photo of this item): 6314 ZZ6314 ZZKG70 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): 6314 ZZ6314 ZZMTM70 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): 6314 ZZ6314 ZZNTE70 × 150 × 35available to orderon request
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 150d 70B 35
    d×D×Bsize 70 × 150 × 35mm
    Cdynamic 104.1kN
    C0static 68kN
    mweight 2.5kg

    Deep groove ball bearing 6314-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80314.

    C, C₀, m: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80314?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0314 corresponds to the ISO base 6314. Size 70 × 150 × 35 mm, a full equivalent of 6314-ZZ.

    Will 6314 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet