+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6312 2RS C3 · 60 × 130 × 31

Deep groove ball · 6312 2RS C3

radial — mediumaxial — low, on both sides
    Drawing of 6312 2RS C3: ⌀60 × ⌀130 × 31 mm6312 2RS C32RS
    Fig. 1: 6312 2RS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6312 2RS C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing TIMKEN 6312 2RS C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 41 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    31 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    C3
    m
    1.7 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 130 × 31 from other brands

    46 products
    Photo: 6312 2RS C3
    You are viewingTIMKEN 6312 2RS C3

    Everything the number specifies matches: series 63, 60 × 130 × 31 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

    • Photo: 6312 2RS C36312 2RS C3This bearingTIMKEN60 × 130 × 31out of stockon requestyou are here
    • Series illustration (not a photo of this item): 6312 2RSC36312 2RSC3CT60 × 130 × 3159 pcs€6.06
    • Series illustration (not a photo of this item): 6312 2RS C36312 2RS C3NTE60 × 130 × 31100 pcs€12.44
    • Photo: 6312-2RS1/C36312-2RS1/C3SKF60 × 130 × 31available to order€45.91
    • Series illustration (not a photo of this item): 6312 2RSC36312 2RSC3KG60 × 130 × 31available to orderon request
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 130d 60B 31
    d×D×Bsize 60 × 130 × 31mm
    mweight 1.7kg

    Deep groove ball bearing 6312-2RS C3, design 2RS: contact seals on both sides.

    M: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet