+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €5.75 per piece.
6300 2RS · 10 × 35 × 11

Deep groove ball · 6300 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6300 2RS: ⌀10 × ⌀35 × 11 mm6300 2RS2RS
    Fig. 1: 6300 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6300 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing TIMKEN 6300 2RS

    €6.96per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    8 exact, 17 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    35 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    11 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    8.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    3.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.053 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 10 × 35 × 11 from other brands

    25 products
    Photo: 6300 2RS
    You are viewingTIMKEN 6300 2RS
    €6.96baseline for the price comparison

    Everything the number specifies matches: series 63, 10 × 35 × 11 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

    • Photo: 6300 2RS6300 2RSThis bearingTIMKEN10 × 35 × 11available to order€6.96you are here
    • Series illustration (not a photo of this item): 6300 2RS6300 2RSCT10 × 35 × 115,000 pcs€0.39−€6.57
    • Series illustration (not a photo of this item): 6300 2RS6300 2RSNTE10 × 35 × 11550 pcs€0.62−€6.34
    • Photo: 6300 2RS6300 2RSZ&S10 × 35 × 11available to order€0.83−€6.13
    • Photo: 6300-2RSH6300-2RSHSKF10 × 35 × 11available to order€3.25−€3.71
    • Series illustration (not a photo of this item): 6300 2RS6300 2RSno brand10 × 35 × 11available to orderon request
    • Photo: 6300 2RS6300 2RSFJK10 × 35 × 11out of stockon request
    • Series illustration (not a photo of this item): 6300 2RS6300 2RSKG10 × 35 × 11available to orderon request

    Under the price: the difference from the price of this bearing (€6.96).
    02

    Often bought with this

    shaft snap ring Ø10, bore snap ring Ø35

    3 products
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø35CT SEG 35 W by 1000Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      €40.62available to order
    • Bore snap ring Ø35SEG 35 W (100 pcs)Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 35d 10B 11
    d×D×Bsize 10 × 35 × 11mm
    Cdynamic 8.1kN
    C0static 3.5kN
    mweight 0.053kg

    Deep groove ball bearing 6300-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180300.

    C, C₀, m: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180300?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0300 corresponds to the ISO base 6300. Size 10 × 35 × 11 mm, a full equivalent of 6300-2RS.

    Will 6300 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet