+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
62305 2RS · 25 × 62 × 24

Deep groove ball · 62305 2RS

radial — mediumaxial — low, on both sides
    Drawing of 62305 2RS: ⌀25 × ⌀62 × 24 mm62305 2RS2RS
    Fig. 1: 62305 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 62305 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing TIMKEN 62305 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    6 exact, 0 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    24 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    m
    0.306 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 62 × 24 from other brands

    8 products
    Photo: 62305 2RS
    You are viewingTIMKEN 62305 2RS

    Everything the number specifies matches: series 623, 25 × 62 × 24 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

    • Photo: 62305 2RS62305 2RSThis bearingTIMKEN25 × 62 × 24out of stockon requestyou are here
    • Series illustration (not a photo of this item): 62305 2RS62305 2RSCT25 × 62 × 24355 pcs€2.14
    • Photo: 62305-2RS162305-2RS1SKF25 × 62 × 2450 pcs€21.71
    • Series illustration (not a photo of this item): 62305-2RSR62305-2RSRFAG25 × 62 × 24available to orderon request
    • Series illustration (not a photo of this item): 62305 2RS62305 2RSKG25 × 62 × 24available to orderon request
    • Photo: 62305 2RS62305 2RSZ&S25 × 62 × 24out of stockon request
    02

    Often bought with this

    shaft snap ring Ø25, bore snap ring Ø62, seal 25×62

    5 products
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.39890 pcs
    • Seal 25×62JULU 025-62-7 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.39available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 25B 24
    d×D×Bsize 25 × 62 × 24mm
    mweight 0.306kg

    Deep groove ball bearing 62305-2RS, design 2RS: contact seals on both sides.

    M: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet