+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
62201 2RS · 12 × 32 × 14

Deep groove ball · 62201 2RS

radial — mediumaxial — low, on both sides
    Drawing of 62201 2RS: ⌀12 × ⌀32 × 14 mm62201 2RS2RS
    Fig. 1: 62201 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 62201 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing TIMKEN 62201 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 6 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    14 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    m
    0.051 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 12 × 32 × 14 from other brands

    14 products
    Photo: 62201 2RS
    You are viewingTIMKEN 62201 2RS

    Everything the number specifies matches: series 622, 12 × 32 × 14 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

    • Photo: 62201 2RS62201 2RSThis bearingTIMKEN12 × 32 × 14out of stockon requestyou are here
    • Series illustration (not a photo of this item): 62201 2RS62201 2RSCT12 × 32 × 141,439 pcs€0.69
    • Series illustration (not a photo of this item): 62201 2RS62201 2RSNTE12 × 32 × 14available to order€0.83
    • Photo: 62201-2RS162201-2RS1SKF12 × 32 × 14available to order€9.62
    • Series illustration (not a photo of this item): 62201 2RS62201 2RSKG12 × 32 × 14available to orderon request
    02

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø32, seal 12×32

    4 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    • Seal 12×32JULU 012-32-7 TCWhy it fits: Oil seal 12×32: shaft 12 and housing bore 32, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.211,410 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 12B 14
    d×D×Bsize 12 × 32 × 14mm
    mweight 0.051kg

    Deep groove ball bearing 62201-2RS, design 2RS: contact seals on both sides.

    M: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 62201 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet