+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6218 · 90 × 160 × 30

Deep groove ball · 6218

radial — mediumaxial — low, on both sides
    Drawing of 6218: ⌀90 × ⌀160 × 30 mm6218
    Fig. 1: 6218, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6218

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing TIMKEN 6218

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    8 exact, 26 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    30 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 90 × 160 × 30 from other brands

    35 products
    Series illustration (not a photo of this item): 6218
    You are viewingTIMKEN 6218

    Everything the number specifies matches: series 62, 90 × 160 × 30 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

    • Series illustration (not a photo of this item): 62186218This bearingTIMKEN90 × 160 × 30available to orderon requestyou are here
    • Series illustration (not a photo of this item): 62186218CT90 × 160 × 30120 pcs€10.27
    • Series illustration (not a photo of this item): 62186218NTE90 × 160 × 3020 pcs€13.65
    • Photo: 62186218FAG90 × 160 × 30available to order€79.64
    • Series illustration (not a photo of this item): 62186218no brand90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): 62186218DYZV90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): 62186218KG90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): 62186218SKF90 × 160 × 30available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 160d 90B 30
    d×D×Bsize 90 × 160 × 30mm

    Deep groove ball bearing 6218. Under GOST the same bearing is designated 218.

    Frequently asked questions

    What is 218?

    It is the same bearing under GOST 3189-89: 218 corresponds to the ISO base 6218. Size 90 × 160 × 30 mm, a full equivalent of 6218.

    Will 6218 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet