+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €5.22 per piece.
6204 2RS · 20 × 47 × 14

Deep groove ball · 6204 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6204 2RS: ⌀20 × ⌀47 × 14 mm6204 2RS2RS
    Fig. 1: 6204 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6204 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing TIMKEN 6204 2RS

    €6.32per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    OEM number
    GASPARDO 51105408
    Equivalents
    15 exact, 96 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    14 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    12.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    6.6 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 20 × 47 × 14 from other brands

    118 products
    Photo: 6204 2RS
    You are viewingTIMKEN 6204 2RS
    €6.32baseline for the price comparison

    Everything the number specifies matches: series 62, 20 × 47 × 14 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

    • Photo: 6204 2RS6204 2RSThis bearingTIMKEN20 × 47 × 14available to order€6.32you are here
    • Series illustration (not a photo of this item): 6204 2RS6204 2RSCT20 × 47 × 1456,914 pcs€0.62−€5.70
    • Series illustration (not a photo of this item): 6204 2RS6204 2RSNTE20 × 47 × 149,699 pcs€0.83−€5.49
    • Series illustration (not a photo of this item): 6204 2NSE6204 2NSENACHI20 × 47 × 1498 pcs€3.01−€3.31
    • Photo: 6204 2RS6204 2RSZ&S20 × 47 × 14available to order€1.11−€5.21
    • Photo: 6204-2RSH6204-2RSHSKF20 × 47 × 14available to order€3.92−€2.40
    • Series illustration (not a photo of this item): 6204 2RS6204 2RSno brand20 × 47 × 14available to orderon request
    • Series illustration (not a photo of this item): 6204 2RS6204 2RSCX20 × 47 × 14available to orderon request
    • Series illustration (not a photo of this item): 6204 2RS6204 2RSDSK20 × 47 × 14available to orderon request
    • Series illustration (not a photo of this item): 6204.2RSR6204.2RSRFAG20 × 47 × 14available to orderon request

    Under the price: the difference from the price of this bearing (€6.32).
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø47, seal 20×47

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.293,920 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    11 machines4 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ exactly this number 4 assemblies · 6 pcs per machine

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo exactly this number 4 assemblies

      manufacturer’s catalogue: maschio_primavera-2009

    3. VBP 2160 (baler) Kuhn exactly this number 2 assemblies · 5 pcs per machine

      manufacturer’s catalogue: kuhn_vbp-2160

    4. Gaspardo Nina 250/​300/​400 (mechanical seed drill) Maschio Gaspardo exactly this number 2 assemblies

      manufacturer’s catalogue: maschio_nina-2015

    5. Gaspardo Nina 250/​300/​400 Maschio Gaspardo exactly this number 1 assembly

      manufacturer’s catalogue: maschio_nina-2007

    Number in the manufacturer’s catalogue: by GOST (180204) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 47d 20B 14
    d×D×Bsize 20 × 47 × 14mm
    Cdynamic 12.8kN
    C0static 6.6kN

    Deep groove ball bearing 6204-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180204.

    C, C₀: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180204?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0204 corresponds to the ISO base 6204. Size 20 × 47 × 14 mm, a full equivalent of 6204-2RS.

    Will 6204 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet