+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €7.10 per piece.
61902 2RS · 15 × 28 × 7

Deep groove ball · 61902 2RS

radial — mediumaxial — low, on both sides
    Drawing of 61902 2RS: ⌀15 × ⌀28 × 7 mm61902 2RS2RS
    Fig. 1: 61902 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
    Bearing TIMKEN 61902 2RS — photo 1
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing TIMKEN 61902 2RS

    €8.59per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    9 exact, 12 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    28 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    7 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    4.3 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    2.3 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 15 × 28 × 7 from other brands

    22 products
    Photo: 61902 2RS
    You are viewingTIMKEN 61902 2RS
    €8.59baseline for the price comparison

    Everything the number specifies matches: series 619, 15 × 28 × 7 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

    • Photo: 61902 2RS61902 2RSThis bearingTIMKEN15 × 28 × 7available to order€8.59you are here
    • Series illustration (not a photo of this item): 6902 / 61902 2RS6902 / 61902 2RSCT15 × 28 × 79,019 pcs€0.31−€8.28
    • Series illustration (not a photo of this item): 6902 2RS6902 2RSKoyo15 × 28 × 720 pcs€7.54−€1.05
    • Series illustration (not a photo of this item): 61902 2RS61902 2RSno brand15 × 28 × 720 pcs€36.11+€27.52
    • Series illustration (not a photo of this item): 6902 2RS6902 2RSCT15 × 28 × 7available to order€0.35−€8.24
    • Series illustration (not a photo of this item): 61902 2RS61902 2RSCT15 × 28 × 7available to order€0.39−€8.20
    • Photo: 61902-2RS161902-2RS1SKF15 × 28 × 7available to order€10.26+€1.67
    • Series illustration (not a photo of this item): 6902 2RS6902 2RSKG15 × 28 × 7available to orderon request
    • Series illustration (not a photo of this item): 6902 2NSE6902 2NSENACHI15 × 28 × 7available to orderon request

    Under the price: the difference from the price of this bearing (€8.59).
    02

    Often bought with this

    shaft snap ring Ø15, bore snap ring Ø28, seal 15×28

    3 products
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø28CT SEG 28 W by 1000Why it fits: DIN 472 snap ring for a 28 bore: holds the outer ring in the housing
      €26.862 pcs
    • Seal 15×28JULU 015-28-7 TCWhy it fits: Oil seal 15×28: shaft 15 and housing bore 28, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.17available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 28d 15B 7
    d×D×Bsize 15 × 28 × 7mm
    Cdynamic 4.3kN
    C0static 2.3kN

    Deep groove ball bearing 61902-2RS, design 2RS: contact seals on both sides.

    C, C₀: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet