+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6006 2RS · 30 × 55 × 13

Deep groove ball · 6006 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6006 2RS: ⌀30 × ⌀55 × 13 mm6006 2RS2RS
    Fig. 1: 6006 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6006 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing TIMKEN 6006 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    14 exact, 43 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    55 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    13 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    13.2 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    8.3 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.12 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 30 × 55 × 13 from other brands

    60 products
    Photo: 6006 2RS
    You are viewingTIMKEN 6006 2RS

    Everything the number specifies matches: series 60, 30 × 55 × 13 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

    • Photo: 6006 2RS6006 2RSThis bearingTIMKEN30 × 55 × 13out of stockon requestyou are here
    • Series illustration (not a photo of this item): 6006 2RS6006 2RSCT30 × 55 × 13437 pcs€0.73
    • Series illustration (not a photo of this item): 6006 2RS6006 2RSNTE30 × 55 × 13420 pcs€0.98
    • Series illustration (not a photo of this item): 6006 2 NSE6006 2 NSENACHI30 × 55 × 1337 pcs€3.88
    • Series illustration (not a photo of this item): 6006 2HRS6006 2HRSFAG30 × 55 × 13270 pcs€4.63
    • Series illustration (not a photo of this item): 6006 2RS6006 2RSKoyo30 × 55 × 13200 pcs€4.63
    • Photo: 6006 2RS6006 2RSZ&S30 × 55 × 13available to order€1.66
    • Series illustration (not a photo of this item): 6006-2RS16006-2RS1SKF30 × 55 × 13available to order€5.22
    • Series illustration (not a photo of this item): 6006 2RS6006 2RSno brand30 × 55 × 13available to orderon request
    • Series illustration (not a photo of this item): 6006 2RS6006 2RSDSK30 × 55 × 13available to orderon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø55, seal 30×55

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø55CT SEG 55 W by 1000Why it fits: DIN 472 snap ring for a 55 bore: holds the outer ring in the housing
      €90.59available to order
    • Seal 30×55JULU 030-55-10 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.39870 pcs
    • Seal 30×55JULU 030-55-7 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.40180 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus-152 Belarus same geometry 4 assemblies · 5 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    Number in the manufacturer’s catalogue: by GOST (180106) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 55d 30B 13
    d×D×Bsize 30 × 55 × 13mm
    Cdynamic 13.2kN
    C0static 8.3kN
    mweight 0.12kg

    Deep groove ball bearing 6006-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180106.

    C, C₀, m: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180106?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0106 corresponds to the ISO base 6006. Size 30 × 55 × 13 mm, a full equivalent of 6006-2RS.

    Will 6006 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet