+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6005 2RS C3 · 25 × 47 × 12

Deep groove ball · 6005 2RS C3

radial — mediumaxial — low, on both sides
    Drawing of 6005 2RS C3: ⌀25 × ⌀47 × 12 mm6005 2RS C32RS
    Fig. 1: 6005 2RS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6005 2RS C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing TIMKEN 6005 2RS C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    OEM number
    577.03.450, 644.81.140, GASPARDO 51104406
    Equivalents
    7 exact, 54 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    12 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    C3
    m
    0.08 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 25 × 47 × 12 from other brands

    62 products
    Photo: 6005 2RS C3
    You are viewingTIMKEN 6005 2RS C3

    Everything the number specifies matches: series 60, 25 × 47 × 12 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

    • Photo: 6005 2RS C36005 2RS C3This bearingTIMKEN25 × 47 × 12out of stockon requestyou are here
    • Series illustration (not a photo of this item): 6005 2RS C36005 2RS C3CT25 × 47 × 12180 pcs€0.47
    • Series illustration (not a photo of this item): 6005 2NSE C36005 2NSE C3NACHI25 × 47 × 12available to order€3.18
    • Photo: 6005-2RSH/C36005-2RSH/C3SKF25 × 47 × 12available to order€4.17
    • Series illustration (not a photo of this item): 6005.2RSR.C36005.2RSR.C3FAG25 × 47 × 12available to orderon request
    • Series illustration (not a photo of this item): 6005 2RSC36005 2RSC3KG25 × 47 × 12available to orderon request
    • Series illustration (not a photo of this item): 6005 2RSC36005 2RSC3NTE25 × 47 × 12available to orderon request
    02

    Often bought with this

    shaft snap ring Ø25, bore snap ring Ø47, seal 25×47

    5 products
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 25×47JULU 025-47-7 TCWhy it fits: Oil seal 25×47: shaft 25 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.292,309 pcs
    • Seal 25×47JULU 025-47-4 TCWhy it fits: Oil seal 25×47: shaft 25 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmed20 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    4 machines3 makesby parts catalogues

    1. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 2 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Gaspardo Nina 250/​300/​400 Maschio Gaspardo same geometry 2 assemblies

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: maschio_nina-2007

    3. VBP 2160 (baler) Kuhn same geometry 1 assembly · 1 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: kuhn_vbp-2160

    4. Gaspardo Nina 250/​300/​400 (mechanical seed drill) Maschio Gaspardo same geometry 1 assembly

      ours: seals on both sides (2RS); in the machine: shields on both sides (ZZ); ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: maschio_nina-2015

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 47d 25B 12
    d×D×Bsize 25 × 47 × 12mm
    mweight 0.08kg

    Deep groove ball bearing 6005-2RS C3, design 2RS: contact seals on both sides.

    M: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet