+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00

There are no dimensions in the data, so no drawing is built.

Bearing housings

Bearing assembly part SNR F 211

Price on request
Available to order
Request a quoteIn the cart: send the request

Specifications

Manufacturer number
ISO designation
Equivalents
0 exact, 48 approximate
01

Equivalents

the same geometry from other brands

48 products
Type diagram, no dimensions: housed unit
You are viewingNTN/SNR F 211

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6211 ZZ6211 ZZmetal shields on both sides, ordinary steelNTE55 × 100 × 21100 pcs€5.34
  • Photo: 6211 ZZ6211 ZZmetal shields on both sides, ordinary steelCT55 × 100 × 21available to order€3.07
  • Photo: 6211 ZZ6211 ZZmetal shields on both sides, ordinary steelROM55 × 100 × 21available to order€4.27
  • Photo: 6211 ZZ6211 ZZmetal shields on both sides, ordinary steelZ&S55 × 100 × 21available to order€7.19
  • Photo: 6211 2Z/C36211 2Z/C3metal shields on both sides, clearance C3, ordinary steelSKF55 × 100 × 21available to order€16.26
  • Photo: 6211-2Z6211-2Zmetal shields on both sides, ordinary steelSKF55 × 100 × 21available to order€17.12
  • Series illustration (not a photo of this item): 6211 ZZ6211 ZZmetal shields on both sides, ordinary steelno brand55 × 100 × 21available to orderon request
  • Type diagram, no dimensions: ball6211 BHTS ZZ 350 BECO PLUSmetal shields on both sides, BHTS, 350, BECO, PLUS: not decodedBECO55 × 100 × ?available to orderon request
  • Cross-section drawing to size: Deep groove ball, 55 × 100 × 21 mm6211 Zshield on one side, ordinary steelCT55 × 100 × 21available to orderon request
  • Series illustration (not a photo of this item): 6211-2Z6211-2Zmetal shields on both sides, ordinary steelFAG55 × 100 × 21available to orderon request
02

Details

what this bearing is, questions

Frequently asked questions

Will 211 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet