+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6009 ZZ C3 · 45 × 75 × 16

Deep groove ball · 6009 ZZ C3

radial — mediumaxial — low, on both sides
    Drawing of 6009 ZZ C3: ⌀45 × ⌀75 × 16 mm6009 ZZ C3ZZ
    Fig. 1: 6009 ZZ C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6009 ZZ C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SNR 6009 ZZ C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 45 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    75 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    16 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    C3
    m
    0.25 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 75 × 16 from other brands

    48 products
    Series illustration (not a photo of this item): 6009 ZZ C3
    You are viewingNTN/SNR 6009 ZZ C3

    Everything the number specifies matches: series 60, 45 × 75 × 16 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NTN/SNR catalogue.

    • Series illustration (not a photo of this item): 6009 ZZ C36009 ZZ C3This bearingNTN/SNR45 × 75 × 16out of stockon requestyou are here
    • Series illustration (not a photo of this item): 6009 2Z/C36009 2Z/C3SKF45 × 75 × 16available to order€9.97
    • Series illustration (not a photo of this item): 6009 ZZC36009 ZZC3KG45 × 75 × 16available to orderon request
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø75, seal 45×75

    4 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø75CT SEG 75 W by 100Why it fits: DIN 472 snap ring for a 75 bore: holds the outer ring in the housing
      €19.77available to order
    • Seal 45×75JULU 045-75-10 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.50480 pcs
    • Seal 45×75JULU 045-75-8 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.57available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    9 machines3 makesby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. KhTZ-17021, KhTZ-17221 KhTZ same geometry 1 assembly · 1 pcs per machine

      the machine has S17; ours does not; ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    3. KhTZ-242K.20 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    4. KhTZ-243K.20 KhTZ same geometry 1 assembly · 1 pcs per machine

      the machine has S17; ours does not; ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    5. T-150-05-09-25, KhTZ-181 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 75d 45B 16
    d×D×Bsize 45 × 75 × 16mm
    mweight 0.25kg

    Deep groove ball bearing 6009-ZZ C3, design ZZ: metal shields on both sides.

    M: NTN/SNR data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet