+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
SLF
6210K.2RSR · 50 × 90 × 20

Deep groove ball · 6210K.2RSR

radial — mediumaxial — low, on both sides
    Drawing of 6210K.2RSR: ⌀50 × ⌀90 × 20 mm6210K.2RSR2RSR
    Fig. 1: 6210K.2RSR, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6210K.2RSR

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SLF 6210K.2RSR

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 75 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    20 mm
    Width BRing width. Source: supplier data
    Seal
    2RSRcontact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 90 × 20 from other brands

    77 products
    Series illustration (not a photo of this item): 6210K.2RSR
    You are viewingSLF 6210K.2RSR

    Everything the number specifies matches: series 62, 50 × 90 × 20 mm, contact seals on both sides, K, normal clearance, special design. The codes in the number are read against the SLF catalogue.

    • Series illustration (not a photo of this item): 6210K.2RSR6210K.2RSRThis bearingSLF50 × 90 × 20available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6210-2RS1K6210-2RS1KSKF50 × 90 × 20available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    18 machines3 makesby parts catalogues

    1. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 8 assemblies · 11 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: shield on one side; ours has K

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    2. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 7 assemblies · 10 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: shield on one side; ours has K

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    3. Belarus 922.3/​922.4 Belarus same geometry 6 assemblies · 8 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: shield on one side; ours has K

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    4. Belarus 1523/​1523V/​1523.3 Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    5. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 90d 50B 20
    d×D×Bsize 50 × 90 × 20mm

    Deep groove ball bearing 6210 K-2RS, design 2RSR: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet