+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
SLF
6208K.2RSR.C3 · 40 × 80 × 18

Deep groove ball · 6208K.2RSR.C3

radial — mediumaxial — low, on both sides
    Drawing of 6208K.2RSR.C3: ⌀40 × ⌀80 × 18 mm6208K.2RSR.C32RSR
    Fig. 1: 6208K.2RSR.C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6208K.2RSR.C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SLF 6208K.2RSR.C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 86 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    2RSRcontact seals on both sides
    Clearance
    C3
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    87 products
    Series illustration (not a photo of this item): 6208K.2RSR.C3
    You are viewingSLF 6208K.2RSR.C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6208 2RS6208 2RSnormal clearance, standard designCT40 × 80 × 18176 pcs€1.67
    • Series illustration (not a photo of this item): 6208 2RS C36208 2RS C3standard designNTE40 × 80 × 18480 pcs€2.69
    • Series illustration (not a photo of this item): 6208 2RS6208 2RSnormal clearance, standard designNTE40 × 80 × 181,692 pcs€2.80
    • Cross-section drawing to size: Deep groove ball, 40 × 80 × 18 mmK 6208 2RSK: not decodedCT40 × 80 × 18294 pcs€2.94
    • Drawing: SS 6208 2RSSS 6208 2RSnormal clearance, stainless steelCT40 × 80 × 1849 pcs€8.13
    • Series illustration (not a photo of this item): 6208 2NSE6208 2NSEnormal clearance, standard designNACHI40 × 80 × 1835 pcs€8.19
    • Series illustration (not a photo of this item): 6208 2HRS6208 2HRSnormal clearance, standard designFAG40 × 80 × 1898 pcs€8.60
    • Series illustration (not a photo of this item): 6208 2RSR C36208 2RSR C3standard designFAG40 × 80 × 18190 pcs€9.17
    • Series illustration (not a photo of this item): 6208 2RS C36208 2RS C3standard designKoyo40 × 80 × 1885 pcs€9.69
    • Series illustration (not a photo of this item): 6208 2RSCM6208 2RSCMclearance CM, standard designKoyo40 × 80 × 1850 pcs€10.91
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    24 machines4 makesby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 6 assemblies · 7 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has K

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has K

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has K

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has K

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 3 assemblies · 3 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has K

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 40B 18
    d×D×Bsize 40 × 80 × 18mm

    Deep groove ball bearing 6208 K-2RS C3, design 2RSR: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet