+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
SLF
6010K.2RSR · 50 × 80 × 16

Deep groove ball · 6010K.2RSR

radial — mediumaxial — low, on both sides
    Drawing of 6010K.2RSR: ⌀50 × ⌀80 × 16 mm6010K.2RSR2RSR
    Fig. 1: 6010K.2RSR, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6010K.2RSR

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SLF 6010K.2RSR

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 33 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    2RSRcontact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 80 × 16 from other brands

    34 products
    Drawing: 6010K.2RSR
    You are viewingSLF 6010K.2RSR

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6010 2RS6010 2RSstandard designCT50 × 80 × 161,754 pcs€1.98
    • Series illustration (not a photo of this item): 6010 2RS6010 2RSstandard designNTE50 × 80 × 1659 pcs€2.58
    • Drawing: SS 6010 2RSSS 6010 2RSstainless steelCT50 × 80 × 16280 pcs€7.72
    • Series illustration (not a photo of this item): 6010 2RS6010 2RSstandard designKoyo50 × 80 × 1623 pcs€10.88
    • Photo: 6010 2RS6010 2RSstandard designZ&S50 × 80 × 16available to order€4.21
    • Photo: 6010-2RS16010-2RS1standard designSKF50 × 80 × 16available to order€12.71
    • Photo: 6010-2RS1/C36010-2RS1/C3clearance C3, standard designSKF50 × 80 × 16available to order€12.71
    • Photo: 6010 2RS6010 2RSstandard designTIMKEN50 × 80 × 16available to order€16.76
    • Photo: 6010 2RS6010 2RSstandard designNEU50 × 80 × 16available to order€20.32
    • Series illustration (not a photo of this item): 6010 2RS6010 2RSstandard designno brand50 × 80 × 16available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    3 machines2 makesby parts catalogues

    1. Belarus-152 Belarus same geometry 3 assemblies · 5 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    2. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has K

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 50B 16
    d×D×Bsize 50 × 80 × 16mm

    Deep groove ball bearing 6010 K-2RS, design 2RSR: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 6010 2RSR C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet