+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NUP 304 ECP · 20 × 52 × 15

Cylindrical roller · NUP 304 ECP

radial — highaxial — low, on both sides
    Drawing of NUP 304 ECP: ⌀20 × ⌀52 × 15 mm⌀52⌀2015NUP 304 ECP
    Fig. 1: NUP 304 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NUP 304 ECP

    Load: radial high; axial low, on both sidesCylindrical roller NUP

    Bearing SKF NUP 304 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 8 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    15 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    35.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 20 × 52 × 15 from other brands

    10 products
    Series illustration (not a photo of this item): NUP 304 ECP
    You are viewingSKF NUP 304 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU 304NU 304different designCT20 × 52 × 156 pcs€1.95
    • Series illustration (not a photo of this item): NJ 304NJ 304different designCT20 × 52 × 15109 pcs€2.11
    • Photo: NU 304 ENU 304 EEZ&S20 × 52 × 15available to order€5.25
    • Photo: NJ 304 ENJ 304 EEZ&S20 × 52 × 15available to order€8.35
    • Photo: NJ 304 EMNJ 304 EME, MZ&S20 × 52 × 15available to order€9.35
    • Photo: NJ 304 EM C3NJ 304 EM C3clearance C3, E, MZ&S20 × 52 × 15available to order€10.51
    • Series illustration (not a photo of this item): NU 304 E-XL-M1NU 304 E-XL-M1E, M1, XLFAG20 × 52 × 15available to orderon request
    • Series illustration (not a photo of this item): NJ 304NJ 304different designUTL20 × 52 × 15out of stockon request
    02

    Often bought with this

    seal 20×52, shaft snap ring Ø20, bore snap ring Ø52

    6 products
    • Seal 20×52JULU 020-52-10 TCWhy it fits: Oil seal 20×52: shaft 20 and housing bore 52, the same as the bearing
      €0.392,570 pcs
    • Seal 20×52JULU 020-52-7 TCWhy it fits: Oil seal 20×52: shaft 20 and housing bore 52, the same as the bearing
      €0.391,300 pcs
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 20 × 52 × 15mm
    Cdynamic 35.5kN

    Cylindrical roller NUP bearing NUP 304 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet