+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NUP 2215 ECP · 75 × 130 × 31

Cylindrical roller · NUP 2215 ECP

radial — highaxial — low, on both sides
    Drawing of NUP 2215 ECP: ⌀75 × ⌀130 × 31 mm⌀130⌀7531NUP 2215 ECP
    Fig. 1: NUP 2215 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NUP 2215 ECP

    Load: radial high; axial low, on both sidesCylindrical roller NUP

    Bearing SKF NUP 2215 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 5 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 75 × 130 × 31 from other brands

    6 products
    Series illustration (not a photo of this item): NUP 2215 ECP
    You are viewingSKF NUP 2215 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ2215-E-XL-M1NJ2215-E-XL-M1E, M1, XLFAG75 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): NJ 2215 ECJNJ 2215 ECJreinforced design EC, pressed steel cageSKF75 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): NJ2215 ENJ2215 EEZVL75 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): NJ 2215 ECP/C3NJ 2215 ECP/C3clearance C3SKF75 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): NU 2215 ECP/C3NU 2215 ECP/C3clearance C3SKF75 × 130 × 31available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 75 × 130 × 31mm

    Cylindrical roller NUP bearing NUP 2215 ECP.

    Frequently asked questions

    Will 2215 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet