+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NUP 208 ECP · 40 × 80 × 18

Cylindrical roller · NUP 208 ECP

radial — highaxial — low, on both sides
    Drawing of NUP 208 ECP: ⌀40 × ⌀80 × 18 mm⌀80⌀4018NUP 208 ECP
    Fig. 1: NUP 208 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NUP 208 ECP

    Load: radial high; axial low, on both sidesCylindrical roller NUP

    Bearing SKF NUP 208 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 45 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    62 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    47 products
    Series illustration (not a photo of this item): NUP 208 ECP
    You are viewingSKF NUP 208 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ 208NJ 208different designCT40 × 80 × 1892 pcs€2.94
    • Series illustration (not a photo of this item): NF 208 ENF 208 EECT40 × 80 × 183 pcs€3.16
    • Series illustration (not a photo of this item): NU 208NU 208different designCT40 × 80 × 18226 pcs€3.69
    • Series illustration (not a photo of this item): N208J PQN208J PQJ, PQ: not decodedNTE40 × 80 × 1828 pcs€7.37
    • Series illustration (not a photo of this item): NJ208J PQNJ208J PQJ, PQ: not decodedNTE40 × 80 × 1848 pcs€7.37
    • Series illustration (not a photo of this item): NU208J PQNU208J PQJ, PQ: not decodedNTE40 × 80 × 1818 pcs€7.37
    • Photo: NF 208NF 208different designZ&S40 × 80 × 18available to order€8.81
    • Photo: NUP 208 ENUP 208 EEZ&S40 × 80 × 18available to order€9.26
    • Photo: NJ 208 ENJ 208 EEZ&S40 × 80 × 18available to order€9.39
    • Photo: NJ 208 EMNJ 208 EME, MZ&S40 × 80 × 18available to order€9.97
    02

    Often bought with this

    seal 40×80, shaft snap ring Ø40, bore snap ring Ø80

    6 products
    • Seal 40×80JULU 040-80-7 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.53770 pcs
    • Seal 40×80JULU 040-80-10 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.54463 pcs
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 40 × 80 × 18mm
    Cdynamic 62kN

    Cylindrical roller NUP bearing NUP 208 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 208 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet