+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 2213 ECP · 65 × 120 × 31

Cylindrical roller · NU 2213 ECP

radial — high
    Drawing of NU 2213 ECP: ⌀65 × ⌀120 × 31 mm⌀120⌀6531NU 2213 ECP
    Fig. 1: NU 2213 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 2213 ECP

    Load: radial high; no axial loadCylindrical roller NU

    Bearing SKF NU 2213 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 7 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    170 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 65 × 120 × 31 from other brands

    9 products
    Series illustration (not a photo of this item): NU 2213 ECP
    You are viewingSKF NU 2213 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ 2213 E-XL-TVP2NJ 2213 E-XL-TVP2E, TVP2, XLFAG65 × 120 × 31available to orderon request
    • Series illustration (not a photo of this item): NU 2213-E-XL-M1NU 2213-E-XL-M1E, M1, XLFAG65 × 120 × 31available to orderon request
    • Series illustration (not a photo of this item): NUP 2213 E-XL-TVP2-C3NUP 2213 E-XL-TVP2-C3clearance C3, E, TVP2, XLFAG65 × 120 × 31available to orderon request
    • Series illustration (not a photo of this item): NJ2213ET *5NJ2213ET *55, E, TNSK65 × 120 × 31available to orderon request
    • Series illustration (not a photo of this item): NU 2213 W C3NU 2213 W C3clearance C3, WNSK65 × 120 × 31available to orderon request
    • Series illustration (not a photo of this item): NUP 2213 E-XL-M1NUP 2213 E-XL-M1E, M1, XLSchaeffler Group65 × 120 × 31available to orderon request
    • Series illustration (not a photo of this item): NJ 2213 ECPNJ 2213 ECPdifferent designSKF65 × 120 × 31available to orderon request
    02

    Often bought with this

    seal 65×120, shaft snap ring Ø65, bore snap ring Ø120

    5 products
    • Seal 65×120JULU 065-120-10 TCWhy it fits: Oil seal 65×120: shaft 65 and housing bore 120, the same as the bearing
      €1.23270 pcs
    • Seal 65×120JULU 065-120-12 TCWhy it fits: Oil seal 65×120: shaft 65 and housing bore 120, the same as the bearing
      €1.23available to order
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 65 × 120 × 31mm
    Cdynamic 170kN

    Cylindrical roller NU bearing NU 2213 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet