+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 2210 ECP · 50 × 90 × 23

Cylindrical roller · NU 2210 ECP

radial — high
    Drawing of NU 2210 ECP: ⌀50 × ⌀90 × 23 mm⌀90⌀5023NU 2210 ECP
    Fig. 1: NU 2210 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 2210 ECP

    Load: radial high; no axial loadCylindrical roller NU

    Bearing SKF NU 2210 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 8 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    90 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 50 × 90 × 23 from other brands

    10 products
    Series illustration (not a photo of this item): NU 2210 ECP
    You are viewingSKF NU 2210 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ 2210NJ 2210different designCT50 × 90 × 2386 pcs€5.58
    • Photo: NUP 2210 ENUP 2210 EEZ&S50 × 90 × 23available to order€11.72
    • Photo: NJ 2210 ENJ 2210 EEZ&S50 × 90 × 23available to order€15.92
    • Series illustration (not a photo of this item): NUP2210E.TVPNUP2210E.TVPE, TVPKoyo50 × 90 × 23available to orderon request
    • Series illustration (not a photo of this item): NU2210ET *5NU2210ET *55, E, TNSK50 × 90 × 23available to orderon request
    • Series illustration (not a photo of this item): NJ 2210 ECPNJ 2210 ECPdifferent designSKF50 × 90 × 23available to orderon request
    • Series illustration (not a photo of this item): NJ2210 ECJNJ2210 ECJreinforced design EC, pressed steel cageSKF50 × 90 × 23available to orderon request
    • Series illustration (not a photo of this item): NU 2210 ECP/C3NU 2210 ECP/C3clearance C3SKF50 × 90 × 23available to orderon request
    02

    Often bought with this

    seal 50×90, shaft snap ring Ø50, bore snap ring Ø90

    5 products
    • Seal 50×90JULU 050-90-10 TCWhy it fits: Oil seal 50×90: shaft 50 and housing bore 90, the same as the bearing
      €0.73280 pcs
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 90 × 23mm
    Cdynamic 90kN

    Cylindrical roller NU bearing NU 2210 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2210 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet