+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ 2207 ECP · 35 × 72 × 23

Cylindrical roller · NJ2207 ECP

radial — highaxial — low, on one side
    Drawing of NJ2207 ECP: ⌀35 × ⌀72 × 23 mm⌀72⌀3523NJ2207 ECP
    Fig. 1: NJ2207 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 2207 ECP

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing SKF NJ 2207 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 12 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    69.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 35 × 72 × 23 from other brands

    13 products
    Series illustration (not a photo of this item): NJ2207 ECP
    You are viewingSKF NJ 2207 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU 2207NU 2207different designCT35 × 72 × 2314 pcs€3.44
    • Photo: NU 2207 E.TVP2NU 2207 E.TVP2E, TVP2FAG35 × 72 × 2319 pcs€36.52
    • Series illustration (not a photo of this item): NJ 2207 ENJ 2207 EECT35 × 72 × 23available to order€4.16
    • Photo: NUP 2207 ENUP 2207 EEZ&S35 × 72 × 23available to order€8.85
    • Photo: NU 2207 ENU 2207 EEZ&S35 × 72 × 23available to order€12.05
    • Photo: NJ 2207 ENJ 2207 EEZ&S35 × 72 × 23available to order€14.34
    • Photo: NJ 2207 ENJ 2207 EEUTL35 × 72 × 23available to order€22.93
    • Photo: NU 2207 ECPNU 2207 ECPdifferent designSKF35 × 72 × 23available to order€34.98
    • Photo: NU 2207 ECPNU 2207 ECPEC, PUTL35 × 72 × 23available to order€36.65
    • Series illustration (not a photo of this item): NF 2207 ENF 2207 EECT35 × 72 × 23available to orderon request
    02

    Often bought with this

    seal 35×72, shaft snap ring Ø35, bore snap ring Ø72

    6 products
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.502,454 pcs
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 23mm
    Cdynamic 69.5kN

    Cylindrical roller NJ bearing NJ2207 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet