+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ 2306 ECP · 30 × 72 × 27

Cylindrical roller · NJ 2306 ECP

radial — highaxial — low, on one side
    Drawing of NJ 2306 ECP: ⌀30 × ⌀72 × 27 mm⌀72⌀3027NJ 2306 ECP
    Fig. 1: NJ 2306 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 2306 ECP

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing SKF NJ 2306 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 8 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    27 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    83 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 30 × 72 × 27 from other brands

    10 products
    Series illustration (not a photo of this item): NJ 2306 ECP
    You are viewingSKF NJ 2306 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU 2306NU 2306different designCT30 × 72 × 275 pcs€4.89
    • Photo: NJ 2306 ENJ 2306 EEZ&S30 × 72 × 27available to order€10.56
    • Photo: NJ 2306 EMNJ 2306 EME, MZ&S30 × 72 × 27available to order€11.89
    • Photo: NUP 2306 ENUP 2306 EEZ&S30 × 72 × 27available to order€12.16
    • Photo: NJ 2306 E1MNJ 2306 E1ME1, MNEU30 × 72 × 27available to order€34.85
    • Series illustration (not a photo of this item): NJ 2306 ENJ 2306 EEno brand30 × 72 × 27available to orderon request
    • Series illustration (not a photo of this item): NJ2306ET *5NJ2306ET *55, E, TNSK30 × 72 × 27available to orderon request
    • Series illustration (not a photo of this item): NU 2306 ECPNU 2306 ECPdifferent designSKF30 × 72 × 27available to orderon request
    02

    Often bought with this

    seal 30×72, shaft snap ring Ø30, bore snap ring Ø72

    6 products
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing
      €0.392,205 pcs
    • Seal 30×72SOG 100958N 30x72x10Why it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 30 × 72 × 27mm
    Cdynamic 83kN

    Cylindrical roller NJ bearing NJ 2306 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet