+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
HK 1012-RS · 10 × 14 × 12

Needle · HK 1012 RS

radial — high
    Simplified drawing of the bearing per ISO 8826-1, dimensions of HK 1012 RS: ⌀10 × ⌀14 × 12 mm⌀14⌀1012HK 1012 RSRS
    Fig. 1: HK 1012 RS, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of HK 1012-RS

    Load: radial high; no axial loadNeedle

    Bearing SKF HK 1012-RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 0 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    14 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    12 mm
    Width BRing width. Source: supplier data
    Outer ring width C
    12 mm
    Outer ring width CWidth of the outer ring. Source: supplier data
    Seal
    RSrubber, one side
    Clearance
    normal clearance
    C
    4.29 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 10 × 14 × 12 from other brands

    4 products
    Cross-section drawing to size: Needle, 10 × 14 × 12 mm
    You are viewingSKF HK 1012-RS

    Not enough data for a firm conclusion: what is missing is written in the row.

    • Series illustration (not a photo of this item): HK 1012HK 1012seal not specifiedCT10 × 14 × 12590 pcs€0.25
    • Series illustration (not a photo of this item): HK 1012HK 1012seal not specifiedno brand10 × 14 × 12available to orderon request
    • Series illustration (not a photo of this item): HK 1012HK 1012seal not specifiedINA10 × 14 × 12available to orderon request
    02

    Often bought with this

    shaft snap ring Ø10, bore snap ring Ø14

    2 products
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø14CT SEG 14 W by 1000Why it fits: DIN 472 snap ring for a 14 bore: holds the outer ring in the housing
      €7.4311 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 10 × 14 × 12mm
    Cdynamic 4.29kN

    Needle bearing HK 1012 RS, design RS: contact seal on one side.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet