+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00

Needle roller thrust · AXK 4565

axial — medium, on one side
    Simplified drawing of the bearing per ISO 8826-1, dimensions of AXK 4565: ⌀45 × ⌀65 mm⌀65⌀45AXK 4565
    Fig. 1: AXK 4565, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of AXK 4565

    Load: radial high; no axial loadNeedle

    Bearing SKF AXK 4565

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 0 approximate
    Bore diameter d
    45 mm
    Bore diameter dSource: from the designation
    Outside diameter D
    65 mm
    Outside diameter DSource: from the designation
    Height (needle Ø or washer thickness)
    3 mm
    Height (needle Ø or washer thickness)Source: CX p.686-687
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    27 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same geometry from other brands

    3 products
    Series illustration (not a photo of this item): AXK 4565
    You are viewingSKF AXK 4565

    Size and design match across the brand catalogues. The codes in the number are read against the SKF catalogue.

    • Photo: AXK 4565AXK 4565NTN45 × 65 × 3out of stockon request
    • Photo: AXK 4565AXK 4565Z&S45 × 65 × 3out of stockon request
    02

    Details

    what this bearing is, questions

    About the bearing

    Cdynamic 27kN

    Needle bearing AXK 4565.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet