+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €26.31 per piece.
7305 BECBP · 25 × 62 × 17

Angular contact ball · 7305 BECBP

at an angle — medium, on one side
    Drawing of 7305 BECBP: ⌀25 × ⌀62 × 17 mm⌀62⌀25177305 BECBP
    Fig. 1: 7305 BECBP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7305 BECBP

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 7305 BECBP

    €31.84per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 11 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    17 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    C
    26.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    15.3 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 25 × 62 × 17 from other brands

    16 products
    Photo: 7305 BECBP
    You are viewingSKF 7305 BECBP
    €31.84baseline for the price comparison

    Everything the number specifies matches: series 73, 25 × 62 × 17 mm, open, no protection, B, special design. The codes in the number are read against the SKF catalogue.

    • Photo: 7305 BECBP7305 BECBPThis bearingSKF25 × 62 × 17available to order€31.84you are here
    • Series illustration (not a photo of this item): 7305 BEP7305 BEPSKF25 × 62 × 17available to orderon request

    Under the price: the difference from the price of this bearing (€31.84).
    02

    Often bought with this

    seal 25×62, shaft snap ring Ø25, bore snap ring Ø62

    5 products
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39890 pcs
    • Seal 25×62JULU 025-62-7 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39available to order
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 1 pcs per machine

      ours has BE, CB, P; the type of our item by number does not match its section: please check; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 62d 25B 17
    d×D×Bsize 25 × 62 × 17mm
    Cdynamic 26.5kN
    C0static 15.3kN

    Angular contact ball bearing 7305 BE.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet