+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
7211 BECBP · 55 × 100 × 21

Angular contact ball · 7211 BECBP

at an angle — medium, on one side
    Drawing of 7211 BECBP: ⌀55 × ⌀100 × 21 mm⌀100⌀55217211 BECBP
    Fig. 1: 7211 BECBP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7211 BECBP

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 7211 BECBP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 10 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    21 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    C
    49 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 55 × 100 × 21 from other brands

    15 products
    Series illustration (not a photo of this item): 7211 BECBP
    You are viewingSKF 7211 BECBP

    Everything the number specifies matches: series 72, 55 × 100 × 21 mm, open, no protection, B, special design. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 7211 BECBP7211 BECBPThis bearingSKF55 × 100 × 21available to orderon requestyou are here
    • Series illustration (not a photo of this item): 7211 BEP7211 BEPSKF55 × 100 × 21available to orderon request
    02

    Often bought with this

    seal 55×100, shaft snap ring Ø55, bore snap ring Ø100

    4 products
    • Seal 55×100JULU 055-100-10 TCWhy it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing
      €0.98630 pcs
    • Seal 55×100SUPTEX 55x100x13Why it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing
      €4.57available to order
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 100d 55B 21
    d×D×Bsize 55 × 100 × 21mm
    Cdynamic 49kN

    Angular contact ball bearing 7211 BE.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet