+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
7208 BEGAP · 40 × 80 × 18

Angular contact ball · 7208 BEGAP

at an angle — medium, on one side
    Drawing of 7208 BEGAP: ⌀40 × ⌀80 × 18 mm⌀80⌀40187208 BEGAP
    Fig. 1: 7208 BEGAP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7208 BEGAP

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 7208 BEGAP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 20 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    C
    36.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    22 products
    Series illustration (not a photo of this item): 7208 BEGAP
    You are viewingSKF 7208 BEGAP

    Everything the number specifies matches: series 72, 40 × 80 × 18 mm, open, no protection, B, special design. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 7208 BEGAP7208 BEGAPThis bearingSKF40 × 80 × 18available to orderon requestyou are here
    • Photo: 7208 BEP7208 BEPSKF40 × 80 × 1810 pcs€28.34
    02

    Often bought with this

    seal 40×80, shaft snap ring Ø40, bore snap ring Ø80

    6 products
    • Seal 40×80JULU 040-80-7 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.53770 pcs
    • Seal 40×80JULU 040-80-10 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.54463 pcs
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 80d 40B 18
    d×D×Bsize 40 × 80 × 18mm
    Cdynamic 36.5kN

    Angular contact ball bearing 7208 BE.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet