+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6415 · 75 × 190 × 45

Deep groove ball · 6415

radial — mediumaxial — low, on both sides
    Drawing of 6415: ⌀75 × ⌀190 × 45 mm6415
    Fig. 1: 6415, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6415

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6415

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    3 exact, 1 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    190 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    45 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 75 × 190 × 45 from other brands

    4 products
    Series illustration (not a photo of this item): 6415
    You are viewingSKF 6415

    Everything the number specifies matches: series 64, 75 × 190 × 45 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 64156415This bearingSKF75 × 190 × 45available to orderon requestyou are here
    • Series illustration (not a photo of this item): 64156415CT75 × 190 × 4515 pcs€21.84
    • Series illustration (not a photo of this item): 64156415NTE75 × 190 × 45available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 190d 75B 45
    d×D×Bsize 75 × 190 × 45mm

    Deep groove ball bearing 6415.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet