+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €325.34 per piece.
6322 · 110 × 240 × 50

Deep groove ball · 6322

radial — mediumaxial — low, on both sides
    Drawing of 6322: ⌀110 × ⌀240 × 50 mm6322
    Fig. 1: 6322, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6322

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6322

    €393.66per piece incl. VAT
    In stock: 2 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 12 approximate
    d
    110 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    240 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    50 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    203 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    180 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    m
    9.48 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 110 × 240 × 50 from other brands

    18 products
    Photo: 6322
    You are viewingSKF 6322
    €393.66baseline for the price comparison

    Everything the number specifies matches: series 63, 110 × 240 × 50 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 63226322This bearingSKF110 × 240 × 502 pcs€393.66you are here
    • Series illustration (not a photo of this item): 63226322CT110 × 240 × 50available to orderon request
    • Series illustration (not a photo of this item): 63226322DYZV110 × 240 × 50available to orderon request
    • Series illustration (not a photo of this item): 63226322FAG110 × 240 × 50available to orderon request
    • Series illustration (not a photo of this item): 63226322KG110 × 240 × 50available to orderon request

    Under the price: the difference from the price of this bearing (€393.66).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 240d 110B 50
    d×D×Bsize 110 × 240 × 50mm
    Cdynamic 203kN
    C0static 180kN
    mweight 9.48kg

    Deep groove ball bearing 6322. Under GOST the same bearing is designated 322.

    C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 322?

    It is the same bearing under GOST 3189-89: 322 corresponds to the ISO base 6322. Size 110 × 240 × 50 mm, a full equivalent of 6322.

    Will 6322 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet