+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €125.63 per piece.
6319 · 95 × 200 × 45

Deep groove ball · 6319

radial — mediumaxial — low, on both sides
    Drawing of 6319: ⌀95 × ⌀200 × 45 mm6319
    Fig. 1: 6319, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6319

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6319

    €152.01per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    3 exact, 17 approximate
    d
    95 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    200 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    45 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C0
    118 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    m
    5.75 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 95 × 200 × 45 from other brands

    21 products
    Photo: 6319
    You are viewingSKF 6319
    €152.01baseline for the price comparison

    Everything the number specifies matches: series 63, 95 × 200 × 45 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 63196319This bearingSKF95 × 200 × 45available to order€152.01you are here
    • Series illustration (not a photo of this item): 63196319CT95 × 200 × 45available to orderon request
    • Series illustration (not a photo of this item): 63196319KG95 × 200 × 45available to orderon request

    Under the price: the difference from the price of this bearing (€152.01).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 200d 95B 45
    d×D×Bsize 95 × 200 × 45mm
    C0static 118kN
    mweight 5.75kg

    Deep groove ball bearing 6319.

    C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 6319 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet