+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €101.70 per piece.
6318 · 90 × 190 × 43

Deep groove ball · 6318

radial — mediumaxial — low, on both sides
    Drawing of 6318: ⌀90 × ⌀190 × 43 mm6318
    Fig. 1: 6318, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6318

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6318

    €123.06per piece incl. VAT
    In stock: 6 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    7 exact, 14 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    190 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    43 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    143 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    108 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 90 × 190 × 43 from other brands

    23 products
    Photo: 6318
    You are viewingSKF 6318
    €123.06baseline for the price comparison

    Everything the number specifies matches: series 63, 90 × 190 × 43 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 63186318This bearingSKF90 × 190 × 436 pcs€123.06you are here
    • Series illustration (not a photo of this item): 63186318CT90 × 190 × 4364 pcs€18.08−€104.98
    • Series illustration (not a photo of this item): 63186318NTE90 × 190 × 4330 pcs€32.84−€90.22
    • Series illustration (not a photo of this item): 63186318DYZV90 × 190 × 43available to orderon request
    • Series illustration (not a photo of this item): 63186318FAG90 × 190 × 43available to orderon request
    • Series illustration (not a photo of this item): 63186318KG90 × 190 × 43available to orderon request
    • Series illustration (not a photo of this item): 63186318TIMKEN90 × 190 × 43available to orderon request

    Under the price: the difference from the price of this bearing (€123.06).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 190d 90B 43
    d×D×Bsize 90 × 190 × 43mm
    Cdynamic 143kN
    C0static 108kN

    Deep groove ball bearing 6318. Under GOST the same bearing is designated 318.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 318?

    It is the same bearing under GOST 3189-89: 318 corresponds to the ISO base 6318. Size 90 × 190 × 43 mm, a full equivalent of 6318.

    Will 6318 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet