+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6317-2Z · 85 × 180 × 41

Deep groove ball · 6317-2Z

radial — mediumaxial — low, on both sides
    Drawing of 6317-2Z: ⌀85 × ⌀180 × 41 mm6317-2Z2Z
    Fig. 1: 6317-2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6317-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6317-2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    6 exact, 26 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    180 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    41 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    C
    140 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 85 × 180 × 41 from other brands

    32 products
    Series illustration (not a photo of this item): 6317-2Z
    You are viewingSKF 6317-2Z

    Everything the number specifies matches: series 63, 85 × 180 × 41 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6317-2Z6317-2ZThis bearingSKF85 × 180 × 41available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6317 ZZ6317 ZZCT85 × 180 × 4124 pcs€16
    • Photo: 6317 ZZ6317 ZZZ&S85 × 180 × 41available to order€39.37
    • Series illustration (not a photo of this item): 6317 ZZ6317 ZZKG85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): 6317 ZZ6317 ZZMTM85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): 6317 ZZ6317 ZZNTE85 × 180 × 41available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 180d 85B 41
    d×D×Bsize 85 × 180 × 41mm
    Cdynamic 140kN

    Deep groove ball bearing 6317-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80317.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80317?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0317 corresponds to the ISO base 6317. Size 85 × 180 × 41 mm, a full equivalent of 6317-ZZ.

    Will 6317 2Z C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet