+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6315-2Z/C3 · 75 × 160 × 37

Deep groove ball · 6315-2Z/C3

radial — mediumaxial — low, on both sides
    Drawing of 6315-2Z/C3: ⌀75 × ⌀160 × 37 mm6315-2Z/C32Z
    Fig. 1: 6315-2Z/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6315-2Z/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6315-2Z/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 20 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    37 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    C3
    C
    119 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 75 × 160 × 37 from other brands

    23 products
    Series illustration (not a photo of this item): 6315-2Z/C3
    You are viewingSKF 6315-2Z/C3

    Everything the number specifies matches: series 63, 75 × 160 × 37 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6315-2Z/C36315-2Z/C3This bearingSKF75 × 160 × 37available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6315 ZZ C36315 ZZ C3NTE75 × 160 × 37available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 1 assembly · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 160d 75B 37
    d×D×Bsize 75 × 160 × 37mm
    Cdynamic 119kN

    Deep groove ball bearing 6315-ZZ C3, design 2Z: metal shields on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet