+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €56.31 per piece.
6314-2Z/C3 · 70 × 150 × 35

Deep groove ball · 6314-2Z/C3

radial — mediumaxial — low, on both sides
    Drawing of 6314-2Z/C3: ⌀70 × ⌀150 × 35 mm6314-2Z/C32Z
    Fig. 1: 6314-2Z/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6314-2Z/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6314-2Z/C3

    €68.14per piece incl. VAT
    In stock: 18 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 44 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    35 mm
    Width BRing width. Source: two supplier sources
    Seal
    2Zmetal shields on both sides
    Clearance
    C3
    C
    111 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 70 × 150 × 35 from other brands

    48 products
    Photo: 6314-2Z/C3
    You are viewingSKF 6314-2Z/C3
    €68.14baseline for the price comparison

    Everything the number specifies matches: series 63, 70 × 150 × 35 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 6314-2Z/C36314-2Z/C3This bearingSKF70 × 150 × 3518 pcs€68.14you are here
    • Series illustration (not a photo of this item): 6314 2Z C36314 2Z C3FAG70 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): 6314 ZZ C36314 ZZ C3NTE70 × 150 × 35available to orderon request

    Under the price: the difference from the price of this bearing (€68.14).
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 150d 70B 35
    d×D×Bsize 70 × 150 × 35mm
    Cdynamic 111kN

    Deep groove ball bearing 6314-ZZ C3, design 2Z: metal shields on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet