+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €29.19 per piece.
6312 · 60 × 130 × 31

Deep groove ball · 6312

radial — mediumaxial — low, on both sides
    Drawing of 6312: ⌀60 × ⌀130 × 31 mm6312
    Fig. 1: 6312, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6312

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6312

    €35.32per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    3 exact, 42 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    31 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    85.2 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    m
    1.9 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 130 × 31 from other brands

    46 products
    Photo: 6312
    You are viewingSKF 6312
    €35.32baseline for the price comparison

    Everything the number specifies matches: series 63, 60 × 130 × 31 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 63126312This bearingSKF60 × 130 × 31available to order€35.32you are here
    • Series illustration (not a photo of this item): 63126312CT60 × 130 × 31571 pcs€9.14−€26.18
    • Series illustration (not a photo of this item): 63126312KG60 × 130 × 31available to orderon request

    Under the price: the difference from the price of this bearing (€35.32).
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (312) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 130d 60B 31
    d×D×Bsize 60 × 130 × 31mm
    Cdynamic 85.2kN
    mweight 1.9kg

    Deep groove ball bearing 6312. Under GOST the same bearing is designated 312.

    C, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 312?

    It is the same bearing under GOST 3189-89: 312 corresponds to the ISO base 6312. Size 60 × 130 × 31 mm, a full equivalent of 6312.

    Will 6312 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet