+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €30.12 per piece.
6311-2RS1/C3 · 55 × 120 × 29

Deep groove ball · 6311-2RS1/C3

radial — mediumaxial — low, on both sides
    Drawing of 6311-2RS1/C3: ⌀55 × ⌀120 × 29 mm6311-2RS1/C32RS1
    Fig. 1: 6311-2RS1/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6311-2RS1/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6311-2RS1/C3

    €36.45per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    4 exact, 39 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    29 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    Clearance
    C3
    C
    74.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    45 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.41 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 55 × 120 × 29 from other brands

    44 products
    Photo: 6311-2RS1/C3
    You are viewingSKF 6311-2RS1/C3
    €36.45baseline for the price comparison

    Everything the number specifies matches: series 63, 55 × 120 × 29 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 6311-2RS1/C36311-2RS1/C3This bearingSKF55 × 120 × 29available to order€36.45you are here
    • Series illustration (not a photo of this item): 6311 2RS C36311 2RS C3NTE55 × 120 × 29100 pcs€10.33−€26.12
    • Photo: 6311 2RSR C36311 2RSR C3FAG55 × 120 × 29100 pcs€29.33−€7.12
    • Series illustration (not a photo of this item): 6311 2RSC36311 2RSC3KG55 × 120 × 29available to orderon request

    Under the price: the difference from the price of this bearing (€36.45).
    02

    Often bought with this

    shaft snap ring Ø55, bore snap ring Ø120

    2 products
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    11 machines2 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 5 assemblies · 8 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. T-156B-09-03 (tractor loader) KhTZ same geometry 4 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractor loader T-156B-09-03. Operator’s manual

    3. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 3 assemblies · 6 pcs per machine

      the machine has A; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours is P0; the machine takes P6

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    4. Belarus 1523/​1523V/​1523.3 Belarus same geometry 3 assemblies · 3 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    5. KhTZ-16131, KhTZ-16331 KhTZ same geometry 3 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 120d 55B 29
    d×D×Bsize 55 × 120 × 29mm
    Cdynamic 74.1kN
    C0static 45kN
    mweight 1.41kg

    Deep groove ball bearing 6311-2RS C3, design 2RS1: contact seals on both sides.

    C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet