+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6309-2Z/C3WT · 45 × 100 × 25

Deep groove ball · 6309-2Z/C3WT

radial — mediumaxial — low, on both sides
    Drawing of 6309-2Z/C3WT: ⌀45 × ⌀100 × 25 mm6309-2Z/C3WT2Z
    Fig. 1: 6309-2Z/C3WT, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6309-2Z/C3WT

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6309-2Z/C3WT

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 61 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    C3
    01

    Equivalents

    the same size 45 × 100 × 25 from other brands

    63 products
    Drawing: 6309-2Z/C3WT
    You are viewingSKF 6309-2Z/C3WT

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6309 2RS6309 2RScontact seals on both sides, normal clearance, standard designCT45 × 100 × 252,972 pcs€3.44
    • Series illustration (not a photo of this item): 6309 2RSC36309 2RSC3contact seals on both sides, standard designNTE45 × 100 × 25289 pcs€6.21
    • Series illustration (not a photo of this item): 6309 2RS6309 2RScontact seals on both sides, normal clearance, standard designNTE45 × 100 × 251,080 pcs€6.46
    • Series illustration (not a photo of this item): 6309 2RS P66309 2RS P6contact seals on both sides, normal clearance, precision class P6, standard designBBC-R45 × 100 × 2530 pcs€7.04
    • Series illustration (not a photo of this item): 6309 2NSE6309 2NSEcontact seals on both sides, normal clearance, standard designNACHI45 × 100 × 2511 pcs€15.71
    • Photo: 6309 -2RSR-C36309 -2RSR-C3contact seals on both sides, standard designFAG45 × 100 × 25152 pcs€16.59
    • Photo: 6309 2RSR6309 2RSRcontact seals on both sides, normal clearance, standard designFAG45 × 100 × 25274 pcs€17.67
    • Series illustration (not a photo of this item): 6309 2RS C36309 2RS C3contact seals on both sides, standard designKoyo45 × 100 × 2520 pcs€21.09
    • Photo: 6309-2RS1/C36309-2RS1/C3contact seals on both sides, standard designSKF45 × 100 × 25104 pcs€21.95
    • Photo: 6309 2RS6309 2RScontact seals on both sides, normal clearance, standard designZ&S45 × 100 × 25available to order€9.24
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø100, seal 45×100

    3 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 45×100JULU 045-100-10 TCWhy it fits: Oil seal 45×100: shaft 45 and housing bore 100, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.93available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    9 machines3 makesby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has WT

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. KhTZ-16131, KhTZ-16331 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has WT

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    3. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 2 assemblies · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has WT; not decoded: mark “K” in the machine catalogue

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 1523/​1523V/​1523.3 Belarus check the version 2 assemblies · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has WT; not decoded: mark “K” in the machine catalogue

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    5. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has WT; not decoded: mark “K” in the machine catalogue

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 100d 45B 25
    d×D×Bsize 45 × 100 × 25mm

    Deep groove ball bearing 6309-ZZ C3, design 2Z: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet