+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6302-Z · 15 × 42 × 13

Deep groove ball · 6302 Z

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6302 Z: ⌀15 × ⌀42 × 13 mm⌀42⌀15136302 ZZ
    Fig. 1: 6302 Z, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6302-Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6302-Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 38 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    42 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    13 mm
    Width BRing width. Source: supplier data
    Seal
    Zshield, one side
    Clearance
    normal clearance
    01

    Equivalents

    the same size 15 × 42 × 13 from other brands

    40 products
    Series illustration (not a photo of this item): 6302 Z
    You are viewingSKF 6302-Z

    Everything the number specifies matches: series 63, 15 × 42 × 13 mm, shield on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6302 Z6302 ZThis bearingSKF15 × 42 × 13available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6302 Z6302 ZKG15 × 42 × 13available to orderon request
    02

    Often bought with this

    shaft snap ring Ø15, bore snap ring Ø42, seal 15×42

    3 products
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø42CT SEG 42 W by 1000Why it fits: DIN 472 snap ring for a 42 bore: holds the outer ring in the housing
      €45.155 pcs
    • Seal 15×42JULU 015-42-7 TCWhy it fits: Oil seal 15×42: shaft 15 and housing bore 42, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      €0.291,120 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus-152 Belarus same geometry 2 assemblies · 3 pcs per machine

      ours: shield on one side; in the machine: open

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    Number in the manufacturer’s catalogue: by GOST (60302) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 42d 15B 13
    d×D×Bsize 15 × 42 × 13mm

    Deep groove ball bearing 6302-Z, design Z: shield on one side. Under GOST the same bearing is designated 60302.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 60302?

    It is the same bearing under GOST 3189-89: 6 — shield on one side, 0302 corresponds to the ISO base 6302. Size 15 × 42 × 13 mm, a full equivalent of 6302-Z.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet