+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
63010-2RS1 · 50 × 80 × 23

Deep groove ball · 63010-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 63010-2RS1: ⌀50 × ⌀80 × 23 mm63010-2RS12RS1
    Fig. 1: 63010-2RS1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 63010-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 63010-2RS1

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 1 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    21.6 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 50 × 80 × 23 from other brands

    6 products
    Series illustration (not a photo of this item): 63010-2RS1
    You are viewingSKF 63010-2RS1

    Everything the number specifies matches: series 630, 50 × 80 × 23 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 63010-2RS163010-2RS1This bearingSKF50 × 80 × 23available to orderon requestyou are here
    • Series illustration (not a photo of this item): 63010 2RS63010 2RSno brand50 × 80 × 23available to orderon request
    • Series illustration (not a photo of this item): 63010 2RS63010 2RSGBM50 × 80 × 23available to orderon request
    • Series illustration (not a photo of this item): 63010 2RS63010 2RSNTE50 × 80 × 23available to orderon request
    • Photo: 63010 2RS63010 2RSZ&S50 × 80 × 23out of stockon request
    02

    Often bought with this

    shaft snap ring Ø50, bore snap ring Ø80, seal 50×80

    6 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 50×80JULU 050-80-10 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.541,000 pcs
    • Seal 50×80JULU 050-80-8 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.54700 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo exactly this number 1 assembly

      manufacturer’s catalogue: maschio_primavera-2009

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 50B 23
    d×D×Bsize 50 × 80 × 23mm
    Cdynamic 21.6kN

    Deep groove ball bearing 63010-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet