+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €3.69 per piece.
6301-2Z · 12 × 37 × 12

Deep groove ball · 6301-2Z

radial — mediumaxial — low, on both sides
    Drawing of 6301-2Z: ⌀12 × ⌀37 × 12 mm6301-2Z2Z
    Fig. 1: 6301-2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6301-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6301-2Z

    €4.46per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    7 exact, 25 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    37 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    12 mm
    Width BRing width. Source: two supplier sources
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    C0
    4.15 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.06 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 12 × 37 × 12 from other brands

    32 products
    Series illustration (not a photo of this item): 6301-2Z
    You are viewingSKF 6301-2Z
    €4.46baseline for the price comparison

    Everything the number specifies matches: series 63, 12 × 37 × 12 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6301-2Z6301-2ZThis bearingSKF12 × 37 × 12available to order€4.46you are here
    • Series illustration (not a photo of this item): 6301 ZZ6301 ZZCT12 × 37 × 124,598 pcs€0.46−€4
    • Series illustration (not a photo of this item): 6301 ZZ6301 ZZNTE12 × 37 × 12400 pcs€0.69−€3.77
    • Photo: 6301 ZZ6301 ZZZ&S12 × 37 × 12available to order€1.13−€3.33
    • Photo: 6301 ZZ6301 ZZFAG12 × 37 × 12available to order€4.46same price
    • Series illustration (not a photo of this item): 6301 ZZ6301 ZZno brand12 × 37 × 12available to orderon request
    • Series illustration (not a photo of this item): 6301 ZZ6301 ZZKG12 × 37 × 12available to orderon request

    Under the price: the difference from the price of this bearing (€4.46).
    02

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø37

    3 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø37CT SEG 37 W by 1000Why it fits: DIN 472 snap ring for a 37 bore: holds the outer ring in the housing
      €37.46out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 37d 12B 12
    d×D×Bsize 12 × 37 × 12mm
    C0static 4.15kN
    mweight 0.06kg

    Deep groove ball bearing 6301-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80301.

    C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80301?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0301 corresponds to the ISO base 6301. Size 12 × 37 × 12 mm, a full equivalent of 6301-ZZ.

    Will 6301 2Z C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet