+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.63 per piece.
6301-2RSH · 12 × 37 × 12

Deep groove ball · 6301-2RSH

radial — mediumaxial — low, on both sides
    Drawing of 6301-2RSH: ⌀12 × ⌀37 × 12 mm6301-2RSH2RSH
    Fig. 1: 6301-2RSH, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6301-2RSH

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6301-2RSH

    €3.18per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    12 exact, 20 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    37 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    12 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSHcontact seals on both sides
    Clearance
    normal clearance
    C0
    4.15 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.062 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 12 × 37 × 12 from other brands

    32 products
    Photo: 6301-2RSH
    You are viewingSKF 6301-2RSH
    €3.18baseline for the price comparison

    Everything the number specifies matches: series 63, 12 × 37 × 12 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 6301-2RSH6301-2RSHThis bearingSKF12 × 37 × 12available to order€3.18you are here
    • Series illustration (not a photo of this item): 6301 2RS6301 2RSCT12 × 37 × 124,000 pcs€0.42−€2.76
    • Series illustration (not a photo of this item): 6301 2RS6301 2RSNTE12 × 37 × 12320 pcs€0.69−€2.49
    • Series illustration (not a photo of this item): 6301 2RS6301 2RSKoyo12 × 37 × 12100 pcs€3.27+€0.09
    • Photo: 6301 2RS6301 2RSKLT12 × 37 × 12available to order€0.42−€2.76
    • Photo: 6301 2RS6301 2RSZ&S12 × 37 × 12available to order€1−€2.18
    • Series illustration (not a photo of this item): 6301 2RS6301 2RSno brand12 × 37 × 12available to orderon request
    • Series illustration (not a photo of this item): 6301 2RS6301 2RSKG12 × 37 × 12available to orderon request
    • Series illustration (not a photo of this item): 6301 2RS6301 2RSMGK12 × 37 × 12available to orderon request
    • Series illustration (not a photo of this item): 6301 2RS6301 2RSMTM12 × 37 × 12available to orderon request

    Under the price: the difference from the price of this bearing (€3.18).
    02

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø37

    3 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø37CT SEG 37 W by 1000Why it fits: DIN 472 snap ring for a 37 bore: holds the outer ring in the housing
      €37.46out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 37d 12B 12
    d×D×Bsize 12 × 37 × 12mm
    C0static 4.15kN
    mweight 0.062kg

    Deep groove ball bearing 6301-2RS, design 2RSH: contact seals on both sides. Under GOST the same bearing is designated 180301.

    C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180301?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0301 corresponds to the ISO base 6301. Size 12 × 37 × 12 mm, a full equivalent of 6301-2RS.

    Will 6301 2RSH C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet