+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €9.20 per piece.
63002-2RS1 · 15 × 32 × 13

Deep groove ball · 63002-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 63002-2RS1: ⌀15 × ⌀32 × 13 mm63002-2RS12RS1
    Fig. 1: 63002-2RS1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 63002-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 63002-2RS1

    €11.13per piece incl. VAT
    In stock: 8 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 0 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    13 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    5.59 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    2.85 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    m
    0.039 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 15 × 32 × 13 from other brands

    3 products
    Photo: 63002-2RS1
    You are viewingSKF 63002-2RS1
    €11.13baseline for the price comparison

    Everything the number specifies matches: series 630, 15 × 32 × 13 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 63002-2RS163002-2RS1This bearingSKF15 × 32 × 138 pcs€11.13you are here
    • Series illustration (not a photo of this item): 63002 2RS63002 2RSCT15 × 32 × 13434 pcs€0.73−€10.40

    Under the price: the difference from the price of this bearing (€11.13).
    02

    Often bought with this

    shaft snap ring Ø15, bore snap ring Ø32, seal 15×32

    4 products
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    • Seal 15×32JULU 015-32-10 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.21150 pcs
    • Seal 15×32JULU 015-32-7 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.21170 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 15B 13
    d×D×Bsize 15 × 32 × 13mm
    Cdynamic 5.59kN
    C0static 2.85kN
    mweight 0.039kg

    Deep groove ball bearing 63002-2RS, design 2RS1: contact seals on both sides.

    C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet