+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
63000-2RS1 · 10 × 26 × 12

Deep groove ball · 63000-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 63000-2RS1: ⌀10 × ⌀26 × 12 mm63000-2RS12RS1
    Fig. 1: 63000-2RS1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 63000-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 63000-2RS1

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 0 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    26 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    12 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    4.62 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 10 × 26 × 12 from other brands

    3 products
    Series illustration (not a photo of this item): 63000-2RS1
    You are viewingSKF 63000-2RS1

    Everything the number specifies matches: series 630, 10 × 26 × 12 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 63000-2RS163000-2RS1This bearingSKF10 × 26 × 12available to orderon requestyou are here
    • Series illustration (not a photo of this item): 63000 2RS63000 2RSCT10 × 26 × 127,650 pcs€0.87
    • Series illustration (not a photo of this item): 63000 2RS63000 2RSno brand10 × 26 × 12available to orderon request
    02

    Often bought with this

    shaft snap ring Ø10, bore snap ring Ø26, seal 10×26

    3 products
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø26CT SEG 26 W by 1000Why it fits: DIN 472 snap ring for a 26 bore: holds the outer ring in the housing
      €22.64available to order
    • Seal 10×26JULU 010-26-7 TCWhy it fits: Oil seal 10×26: shaft 10 and housing bore 26, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.181,400 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 26d 10B 12
    d×D×Bsize 10 × 26 × 12mm
    Cdynamic 4.62kN

    Deep groove ball bearing 63000-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet